Rainwater evacuation systems are essential for all types of buildings, whether we are talking about industrial buildings or houses or residential blocks. However, each use requires a different type of gutter. Since the water collection system must adapt to the use and requirements of each construction. That is why we can distinguish between installations for residential or industrial use.
The most normal thing is to talk about rainwater channeling systems for homes, so in this post we will focus on the needs of gutters for industry. We will see that we have to take into account characteristics such as capacity, materials or the type of installation that we are going to place depending on the industrial building we are talking about.
Capacity of the rain gutters
One of the main aspects that we must take into account is that usually buildings dedicated to industrial use need ducts with greater capacity than residential ones . This is due in most cases because these are constructions with a large roof area. So the water to be drained from the roof will be greater. And therefore, it is necessary that the facility has sufficient capacity to manage all the water in case of a storm or a water stream.
On the other hand, in many cases it is possible that in this type of activities choose roof gutter repairs perthwaof more capacity also to avoid possible accidents. Since the maintenance of wider ducts is usually easier. So that the budget for repairs is also reduced compared to an installation with lower capacity.
In any case, it is the task of the gutter installer to make a calculation of the capacity of the ducts necessary in each case. So you always have to be guided by what the professionals tell us and not make this decision lightly.
Materials used for duct manufacturing
As we have said, in most cases it is sought that the gutters for industrial buildings have the least possible maintenance. Therefore, the material chose for the installation of the rainwater evacuation system also greatly influences. On the other hand, in the case of homes, especially single-family homes, many aspects usually influence the decision making of the material. Not only the practicality, but also the aesthetics or the budget that is available.
However, in the channels for industrial buildings what is sought is durability and that they have a very low maintenance. So the most popular option is usually the aluminum gutters. Due to the ease of installation, the resistance over time and its fantastic value for money.
We must point out that we can also find rain pipes for industrial use of other materials such as zinc or galvanized steel. But the most recommended are the aluminum gutters.
Type of water collection duct installation
Another factor that greatly influences the differentiation between residential and industrial channels is the type of installation that is carried out. Although in most cases there is not much difference and usually place external systems. We have to take into account that in many cases the installation of rainwater drainage systems in industrial buildings is done at the same time as the building is built.
So it is very normal to find hidden gutters in buildings such as industrial buildings. Whose installation has been taken into account in the construction integrating into the roof itself and hiding the downspouts in the walls. It should be noted that although this is very normal, in our facilities of Cool Gutters in Perth as experts we usually recommend exterior fittings.
Since in the event of a breakdown such as a leak or a broken pipe, repair will be much more expensive. Besides that it will be much more difficult to detect the problem and probably when we do it will be much greater. In any case, before installing a rain gutter in a construction destined for industrial use, consult and always be advised by a sector professional.